Designer Menu: Difference between revisions

From Hazeron Wiki
Jump to navigation Jump to search
Line 162: Line 162:
* A small angle will select contiguous faces that are in the same plane as the selected face(s).
* A small angle will select contiguous faces that are in the same plane as the selected face(s).
* An angle of 180 or larger will select all contiguous faces, regardless of their angle to each other.
* An angle of 180 or larger will select all contiguous faces, regardless of their angle to each other.
Only available in face mode.


==Select Edges==
==Select Edges==
Selects all visible edges.
Only available in face mode.


==Select Faces==
==Select Faces==
Selects all visible faces.
Only available in face mode.


==Select Vertices==
==Select Vertices==
Selects all visible vertices.
Only available in face mode.


==Deselect All==
==Deselect All==
Deselects all selected objects.


==Invert Selection==
==Invert Selection==
Reverses the selection state of all visible objects. Selected items become unselected. Unselected items become selected.


==Align Selected Objects==
==Align Selected Objects==
Moves and rotates the selected parts.
The move is described using the grid. The grid is oriented relative to the selected parts. That grid location is identified as the starting reference for the move. The grid is then oriented to the destination location and rotation.
Selected parts are moved such that the grid orientation at the start location aligns with the grid orientation at the destination.
This is the same as aligning the grid to the objects, cutting them to the clipboard, then aligning the grid to the destination and pasting the clipboard contents there.


==Grab Selected Objects==
==Grab Selected Objects==
Moves or copies the selected objects.
The guide point is the grid center when the grab is initiated using a menu command. The guide point is the cursor location when the grab is initiated using a hot key.
Steps:
* A [[Designer#Coordinate_Input|point is entered]] at the destination.
Key Commands:
*<code>X</code>,<code>Y</code>,<code>Z</code> locks movement to an axis. Default is none.
*<code>Ctrl</code> when held, copies the selected objects instead of moving them.
Note:
When the movement vector is known, there is another easy way to move and copy selected objects, without using this Grab Selection command. To do so, type the movement vector into the [[Designer#Coordinate_Input|Coordinate Input]] box of the input tool bar. Press Enter to move the selected objects, Ctrl+Enter to copy the selected objects.


==Rotate Selected Objects==
==Rotate Selected Objects==

Revision as of 20:03, 14 July 2020

Menu Bar
Menu Bar

The designer menu bar is itemized here.

File

New Building

Clears the design space. Configures the designer for designing a building.

New Spacecraft

Clears the design space. Configures the designer for designing a spacecraft.

Open

Opens a design from an SoH file. The file contents cause the designer to configure appropriately, for designing the kind of design read from the file.

Save

Saves the current design into an SoH file. If the current file name is already known, it is overwritten without asking for a file name.

It is strongly recommended that you save all of the designs in SoH files that you intend to finalize in the on line designer. That way you have a backup copy of your designs, in case the server data is lost or reset.

Save As

Saves the current design into an SoH file. Asks the architect to provide a file name.

It is strongly recommended that you save all of the designs in SoH files that you intend to finalize in the on line designer. That way you have a backup copy of your designs, in case the server data is lost or reset.

Open Building from Library

Opens a building design from the universal library. Building designs created by you are available for opening. Configures the designer for designing a building.

Only available in the on line designer.

Open Spacecraft from Library

Opens a spacecraft design from the universal library. Spacecraft designs created by you are available for opening. Configures the designer for designing a spacecraft.

Only available in the on line designer.

Open from Gear

Opens a blueprint from media in your personal gear. The designer is configured appropriately, for designing the kind of blueprint read from the media.

Media contains publishing terms for the blueprints that are stored there. Publisher terms can prohibit you from opening a blueprint in the designer.

Only available in the on line designer.

Save Building to Gear

Stores a building blueprint onto a storage device in your avatar's gear, from the universal library. Building blueprints finalized by you are available for storing to the storage device.

Terms similar to publishing a blueprint are specified by the architect, to restrict use of the blueprint.

Only available in the on line designer.

Save Spacecraft to Gear

Stores a spacecraft blueprint onto a storage device in your avatar's gear, from the universal library. Spacecraft blueprints finalized by you are available for storing to the storage device.

Terms similar to publishing a blueprint are specified by the architect, to restrict use of the blueprint.

Only available in the on line designer.

Import

There is a lot of 3D model data available on the Internet. Spacecraft, buildings, weapons, vehicles and all kinds of other things can be found, many for free.

Importing brings 3D models created in other programs into the Hazeron designer. Imported models can provide a starting point for a fully functional spacecraft or building in Hazeron.

No model will be ready for use immediately after importing. Many downloadable models lack interior details, such as rooms. Often times they are not textured. Further work in the Hazeron designer is always needed, before an imported model can be finalized for use in the game.

Buildings are easier than spacecraft because no interior is required at all. Interior spaces of Hazeron buildings are optional.

Spacecraft are probably the most rewarding to import and flesh out. They really come to life when you add a few interior spaces and windows, texture everything, make the doors work, and add the little details like blinking lights and control stations.

3DS

3DS is one of the file formats used by the Autodesk 3ds Max 3D modeling, animation and rendering software. It was the native file format of the old Autodesk 3D Studio DOS (releases 1 to 4), which was popular until its successor (3D Studio MAX 1.0) replaced it in April 1996.

Some 3DS files can be imported into the designer. Sometimes a 3DS file will be accompanied by a corresponding texture image, such as a BMP, PNG or JPG file.

In testing, good success was achieved by importing 3DS files that were exported from Blender, which is a free modeling program. Poor success was achieved importing some other 3DS files from unknown sources. In some cases, a troublesome 3DS file can be salvaged if it is first imported into Blender, then exported as a new 3DS file. Blender can also import other model file formats and export them as 3DS files.

The 3DS model is oriented to the grid plane when it is imported. The parts of the 3DS model are appended to the current design as generic mesh parts. Use the Design, Make options to convert them to other kinds of parts.

3DS files do not specify their unit of measure. A 10 in the file could mean 10 feet, 10 inches, 10 meters, who knows. A window appears when importing the file to ask what unit of measure you think the 3DS file is using. Your answer affects the size of the resulting model. i.e. If you pick inches and the result is 12 times too small, try feet instead. If the result is too big or too small, it can be imported again using a different unit of measure or the designer can stretch it to a different size afterwards.

STL

STL (an abbreviation of "stereolithography") is a file format native to the stereolithography CAD software created by 3D Systems. STL has several backronyms such as "Standard Triangle Language" and "Standard Tessellation Language".

Some STL files can be imported into the designer.

The STL model is oriented to the grid plane when it is imported. The STL model is appended to the current design as a generic mesh. Use the Design, Make options to convert it to another kind of part.

STL files do not specify their unit of measure. A 10 in the file could mean 10 feet, 10 inches, 10 meters, who knows. A window appears when importing the file to ask what unit of measure you think the STL file is using. Your answer affects the size of the resulting model. i.e. If you pick inches and the result is 12 times too small, try feet instead. If the result is too big or too small, it can be imported again using a different unit of measure or the designer can stretch it to a different size afterwards.

STL files do not specify any texture information.

Export STL

Exports all of the visible faces of the current design into an STL file.

The exported result is oriented to the design plane and sized according to the unit of measure specified on the export options window.

Depart Studio

Avatar leaves the design environment and returns to the game universe at the point of entry.

Only available in the on line designer.

Exit

Closes the Shores of Hazeron program.

Edit

Undo

Restores the design to the way it was before the last editing operation was performed.

Redo

Restores the result of undo, as if the undo was not performed.

Cut

Removes the parts that are selected from the design.

The removed parts are copied to the clipboard, oriented according to the grid plane when they are cut.

Copy

Copies the parts that are selected to the clipboard, oriented according to the grid plane.

Paste

Parts on the clipboard are appended to the design, oriented to the grid plane.

Paste At

Pastes the clipboard contents using the cursor. The design grid describes how the part is copied and pasted. The clipboard contents are centered at the grid origin when copied to the clipboard. When pasting, the clipboard content is centered at the cursor location. In other words, the grid center when copied is the insertion point of the pasted objects.

Steps:

Key Commands:

  • Left/Right Arrows rotates around the Z axis in 10 degree increments.
  • PgUp/PgDn rotates around the Y axis in 10 degree increments.
  • Up/Down Arrows rotates around the X axis in 10 degree increments.
  • Shift reduces rotation to 1/10 degree increments.

Paste Radial

Pastes the clipboard contents using the cursor. The pasted objects rotate around the center of the design plane according to the position of the cursor.

The grid describes how the part is copied and pasted. The clipboard contents are centered at the grid origin when copied to the clipboard. When pasting, the clipboard content is centered at the cursor location. In other words, the grid center when copied is the insertion point of the pasted objects.

Steps:

Key Commands:

  • Left/Right Arrows rotates around the Z axis in 10 degree increments.
  • PgUp/PgDn rotates around the Y axis in 10 degree increments.
  • Up/Down Arrows rotates around the X axis in 10 degree increments.
  • Shift reduces rotation to 1/10 degree increments.

Delete

Removes the selected objects from the design. They are not copied to the clipboard.

Select All

Selects all visible objects.

In part mode, this is all visible parts. In face mode, this is all faces in the part.

Select Contiguous Faces

Faces that share a common edge with the currently selected face(s) will be selected.

The angle allowed between the facing direction of faces is allowed, to select them. Faces that join at a steeper angle are not selected.

  • A small angle will select contiguous faces that are in the same plane as the selected face(s).
  • An angle of 180 or larger will select all contiguous faces, regardless of their angle to each other.

Only available in face mode.

Select Edges

Selects all visible edges.

Only available in face mode.

Select Faces

Selects all visible faces.

Only available in face mode.

Select Vertices

Selects all visible vertices.

Only available in face mode.

Deselect All

Deselects all selected objects.

Invert Selection

Reverses the selection state of all visible objects. Selected items become unselected. Unselected items become selected.

Align Selected Objects

Moves and rotates the selected parts.

The move is described using the grid. The grid is oriented relative to the selected parts. That grid location is identified as the starting reference for the move. The grid is then oriented to the destination location and rotation.

Selected parts are moved such that the grid orientation at the start location aligns with the grid orientation at the destination.

This is the same as aligning the grid to the objects, cutting them to the clipboard, then aligning the grid to the destination and pasting the clipboard contents there.

Grab Selected Objects

Moves or copies the selected objects.

The guide point is the grid center when the grab is initiated using a menu command. The guide point is the cursor location when the grab is initiated using a hot key.

Steps:

Key Commands:

  • X,Y,Z locks movement to an axis. Default is none.
  • Ctrl when held, copies the selected objects instead of moving them.

Note: When the movement vector is known, there is another easy way to move and copy selected objects, without using this Grab Selection command. To do so, type the movement vector into the Coordinate Input box of the input tool bar. Press Enter to move the selected objects, Ctrl+Enter to copy the selected objects.

Rotate Selected Objects

Stretch Selected Objects

Settings

Blueprint

Properties

Refresh Obstructions

Solids Obstruct Movement

Gravity On/Off

Preview On/Off

Preview People

Preview Settings

Preview Place Building

Finalize

Previous Finalize Result

Part

Properties

Door

Door Switch Positions

Light Bulb

Light Lens

Room Lighting

Room Void Gravity and Hold Access

Site

Transporter Station Pad Locations

Turret Base Position

Turret Gun Position

Weapon Emit Location

Door

Hull

Room

Landing Gear

Mesh

Jig

Cutting

Decal

Door

Launch Tube

Window

Stations

Integrated

Command

Designer

Engineer

Fire Control

Helm

Medic

Navigator

Power Relay

Sensor

Shield

Transporter

Turret Gunner

Swivel Consoles w/Chairs

Command

Engineer

Fire Control

Helm

Medic

Navigator

Power Relay

Sensor

Shield

Transporter

Citizen Post

Livestock Post

Troop Post

Panels

Alert Status

Mission Status

Room Life Support Status

World Map

Capacitor Service Panel

FTL Drive Service Panel

Life Support Service Panel

Maneuver Drive Service Panel

Power Plant Service Panel

Sensor Service Panel

Shield Service Panel

Weapon System Service Panel

Vehicles

Pod Bay

Ground Vehicle Parking Spot

Space Rocket Parking Spot

Space Vehicle Parking Spot

Water Vehicle Parking Spot

Space Vehicle Recovery System

Space Vehicle Launcher

Spacecraft Parking Spot

Details

Berths

Captain

Officer

Crew

Troop

Passenger

Contrail Emitter

Decals

Empire Flag

Empire Name

Spacecraft Name

Captain's Name

Berth Assignee's Name

Game Table

Light Bulb

Remote Camera

Landscape

Fence/Wall

Shrub

Tree

Site

Build Zone

Paths

Barrier

Hull Void

Room Void

Environment Void

Walk Path

Ladder Path

Sketch

Align Turbo Lift Stop

Associate Parts

Dissociate Parts

Jig Cut

Join

Make

Decal

Door

Hull

Mesh

Room

Turbo Lift

Turret

Window

Light Lens

Navigation Light Lens

Rotating Beacon Lens

Strobe Lens

Symmetrical Copy

Face

Face Mode

Isolate Parts

Add

Finish

Paint

Polish

Glow

Self Illumination

Transparency

Effect Intensity

Cut Face

Divide Faces

Flatten Vertices

Fracture Faces

Fuse Faces

Loop Cut

Punch Face

Push Pull

Reverse Faces

Smooth Vertices

Split Faces

Helpers

Save Grid Position

Restore Grid Position

Find Vertices

Find Edges

Find Faces

Move Grid

Moving the grid changes the location of its center. The rotation of the grid does not change. The grid center is where the red X axis and green Y axis lines cross.

The grid is a tool for drawing. It is like a ruler, not a piece of graph paper. The grid should be moved and rotated as needed, wherever it will help to draw. All drawing takes place in the coordinate space of the grid.

Steps:

Key Commands:

  • S restores the center of the grid to the true center of the design space without changing its rotation.

XY Grid

XZ Grid

YZ Grid

Position Grid

Positioning the grid changes the location of its center and the rotation of the grid lines. The grid center is where the red X axis, green Y axis, and blue Z axis lines cross.

The grid is a tool for drawing, It is like a ruler, not a piece of graph paper. The grid should be moved and rotated as needed, wherever it will help to draw. All drawing takes place in the coordinate space of the grid.

Steps:

  • A point is entered at the new grid center.
  • A second point is entered to set the direction of the red X axis line. Its distance from the center does not matter as it only determines a direction.
  • A third point is entered to set the direction of the green Y axis line. It may be entered at any location in the new grid plane.

Key Commands:

  • B backs up to reenter the previous point requested.
  • C restarts the action at the beginning.
  • S restores the grid to the true center and rotation of the design space.
  • F restores the grid rotation to flat, without moving the grid.
  • X rotates the grid 180 degrees around the X axis, without moving the grid.
  • Y rotates the grid 180 degrees around the Y axis, without moving the grid.
  • Z rotates the grid 180 degrees around the Z axis, without moving the grid.

Show Grid

Grid Follows Work

Snap to Grid

Snap to Edges

Snap to Vertices

Bounding Box

Building Structure Design Limit

Building Structure Site Limit

Spacecraft Ground Build Limit

Spacecraft Max Design Limit

Change My DNA

View

Go To Selection

Save My Position

Restore My Position

Position to Origin

Position to Grid

Restore Number

Show Back Faces

Show Edges

Show Faces

Show Ground

Show Sky Box

Full Screen

Input Bar

Reference Bar

Parts Bar

Texture Wrapper

Help

Online Wiki

Online Videos

Building Codes

About