Design Parts: Difference between revisions

From Hazeron Wiki
Jump to navigation Jump to search
Line 544: Line 544:
=Panel, FTL Drive=
=Panel, FTL Drive=
[[file:AccessFTLDrive.png|64px|right|FTL Drive Service Panel]]
[[file:AccessFTLDrive.png|64px|right|FTL Drive Service Panel]]
FTL drive service panel provides access to an FTL drive system of a spacecraft. Repairs to the system can be performed there. Parts can be removed from the system there. System modules can be upgraded there.
FTL drive service panel provides access to an FTL drive subsystem of a spacecraft. Repairs to the subsystem can be performed there. Parts can be removed from the subsystem there. Subsystem modules can be upgraded there.


FTL drive service panel is associated with an engineer station. This determines which FTL drive subsystem the service panel accesses.
FTL drive service panel is associated with an engineer station. This determines which FTL drive subsystem the service panel accesses.

Revision as of 16:59, 17 July 2020

Designs are made up of parts. Here is a comprehensive list of all of the parts that can comprise a design.

Some parts are only available depending on if it is a building design, spacecraft design, or other.

Barrier

Barrier
Barrier

Barriers created obstructions to movement and gunfire inside voids.

Barriers are not visible when the design is seen in the game environment.

Barriers create floors for things on top of them. Use barriers to create the floors of ramps and stairs. When creating stairs, it is much more efficient to make a ramp-floor under the steps than to create complex or many barriers to simulate every step.

Barriers can be associated with a state of a door or landing gear. This determines which barriers are obstructions when the door or landing gear is operated. It is ok to associate more than one barrier with a state of a door or landing gear.

Berth, Capt

Capt Berth
Capt Berth

Capt berth is the place where the captain sleeps. Only a human player can occupy the capt berth.

A design can have only one capt berth. Attempting to add additional capt berths causes the existing capt berth to move to the new location, instead of adding a new one.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Crew

Crew Berth
Crew Berth

Crew berth is the place where a member of the crew sleeps. Human players and NPCs can occupy crew berths.

When crew board a newly assigned ship, they do so by recalling to their berth. The architect should insure they can find a path from their berth to every control station on the ship. The control station they are assigned is unpredictable because it is affected by the NPC's skill level.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Officer

Officer Berth
Officer Berth

Officer berth is the place where an officer of the ship sleeps. Human players and NPCs can occupy officer berths.

When officers board a newly assigned ship, they do so by recalling to their berth. They sometimes like to sit at a command station but it is never required. It is considerate to insure the path network helps them find their way to any command stations aboard the ship.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Passenger

Passenger Berth
Passenger Berth

Passenger berth is the place where a passenger of the ship sleeps. Human players and NPCs can occupy passenger berths.

When passengers board a newly assigned ship, they do so by recalling to their berth. They like to explore the ship so you will find them wherever they can gain access. Passengers cannot open locked doors but they will walk through any door that is open.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Troop

Troop Berth
Troop Berth

Troop berth is the place where a troop assigned to the ship sleeps. Human players and NPCs can occupy troop berths.

When troops board a newly assigned ship, they do so by recalling to their berth. Troops operate the gun turrets of a ship but not its main weapon systems; they also position themselves at troop posts. The architect should insure the troops can find a path from their berth to every turret station and troop post on the ship.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Build Zone

Build Zone
Build Zone

A build zone mesh describes the areas of a platform structure where buildings may be constructed. They also create floors for creatures and things on top of the platform. More than one build zone mesh may be used to describe building areas of a platform.

Build zones create floors for creatures and things on top of the platform. The space for 3m above a build zone acts like a hull void to negate hull obstructions.

Build zone meshes should form level flat areas for buildings. Buildings built on build zone meshes do not modify the underlying platform model, like they do when placed on natural terrain.

Site meshes of buildings built on a platform must fit within the bounds of the platform's build zone meshes. Buildings are oriented up with respect to the platform, regardless of any slope of the build zone mesh.

Camera

Camera
Camera

Remote cameras permit an avatar sitting at a command station to see from the camera's location.

Command station controls provide a camera on/off switch, then back/next sequencing to select cameras. The part number of a camera determines its order in the back/next sequence.

Remote camera icons provide location information only. They are not visible in the final model. Size and rotation of the icon do not affect the camera. Camera location is at the center of the icon.

To avoid tediously switching between many cameras, use an efficient number of remote cameras.

Console, Command

Command Console
Command Console

Command console provides a place for the capt or officer to command the ship. NPC officers are not required to sit there but sometimes they will choose to do so.

The default command console model is a chair with no screen. A screen appears when the person at the station brings up some control station for interaction.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the command station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding command station part that can be used instead of this stock console.

Console, Engineer

Engineer Console
Engineer Console

Engineer console provides a place for an avatar or NPC crew to control the power plant, maneuver drive, and FTL drive of the ship.

Engineer stations are only for spacecraft designs; they cannot be placed in buildings.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the engineer station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding engineer station part that can be used instead of this stock console.

Console, Fire Control

Fire Control Console
Fire Control Console

Fire control console provides a place for an avatar or NPC crew to control the equipment bays of the ship. Equipment bays typically hold weapon systems, though they can also hold harvesters and tractor beams.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the fire control station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding fire control station part that can be used instead of this stock console.

Console, Helm

Helm Console
Helm Console

Helm console provides a place for an avatar or NPC crew to pilot the ship.

Helm stations are only for spacecraft designs; they cannot be placed in buildings.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the helm station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding helm station part that can be used instead of this stock console.

Console, Medic

Medic Console
Medic Console

Medic console provides a place for an avatar or NPC crew to operate a surgery unit on the ship.

The medic station stores a patient location and orientation for the patient. The patient location is only a location. Additional geometry may be added to create the appearance of a bed or chamber.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the medic station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding medic station part that can be used instead of this stock console.

Console, Navigator

Navigator Console
Navigator Console

Navigator console provides a place for an avatar or NPC crew to plan and establish a route for the ship.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the navigator station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding navigator station part that can be used instead of this stock console.

Console, Power Relay

Power Relay Console
Power Relay Console

Power relay console provides a place for an avatar or NPC crew to make dubious adjustments to the power system of the spacecraft.

Power relay stations are only for spacecraft designs; they cannot be placed in buildings.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the power relay station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding power relay station part that can be used instead of this stock console.

Console, Sensor

Sensor Console
Sensor Console

Sensor console provides a place for an avatar or NPC crew to control the sensors of a spacecraft or building.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the sensor station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding sensor station part that can be used instead of this stock console.

Console, Shield

Shield Console
Shield Console

Shield console provides a place for an avatar or NPC crew to control the shields of a spacecraft or building.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the shield station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding shield station part that can be used instead of this stock console.

Console, Transporter

Transporter Console
Transporter Console

Transporter console provides a place for an avatar or NPC crew to control a transporter system of a spacecraft or building.

Each transporter station creates a new transporter system. Each station stores the location of its teleportation pads.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the transporter station is required.

The architect must create the geometry for teleportation pads, if desired. Using surface effects, teleporter pads can be made to look alive when the transporter is in use.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding transporter station part that can be used instead of this stock console.

Contrail Emitter

Contrail Emitter
Contrail Emitter

Contrail emitters provide places for the glowing hot exhaust of maneuver drives to emanate when the engines are running.

Contrails emit a glowing trail as a space ship moves. On space stations, contrails are short in length and they point down toward gravity, as if the station were hovering there strictly on thrusters alone.

The width of the contrail made by the emitter is based on the size of the emitter icon in the design.

The color of contrails is an empire policy setting.

A space ship with no contrail emitter will get a default emitter. It will be centered at the aft extents of the design. The size will be about 1/4 the width of the design.

Space stations are not required to have contrail emitters. If none are added to the design, a space station will emit no contrails.

Decal

Decal
Decal

Decal parts are intended to simulate the decals applied to plastic models. They typically arrive on a sheet. They are stuck to the finished plastic model like stickers.

Decal Sheet
Decal Sheet

A decal's faces are textured like the faces of any other part. When rendered, faces of decals are blended onto the faces of underlying geometry. OpenGL is configured to enable decals to exist in the same plane as other surfaces, without getting culled or causing unwanted surface collisions.

Decals should generally be placed where they conform to an existing surface, though this is not strictly necessary if a desirable visual effect is achieved by using them otherwise.

Decal, Berth Name

Berth Occupant Name Decal
Berth Occupant Name Decal

A berth name decal is a rectangle for displaying the name of the person assigned to a berth. When the associated berth is not assigned, the berth name decal shows Unassigned.

Decal, Capt Name

Capt Name Decal
Capt Name Decal

A capt name decal is a rectangle for displaying the name of the captain of the spacecraft.

Decal, Empire Flag

Empire Flag Decal
Empire Flag Decal

A flag decal is a rectangle for displaying the flag of the empire.

Decal, Empire Name

Empire Name Decal
Empire Name Decal

A empire name decal is a rectangle for displaying the name of the empire.

Decal, Ship Name

Ship Name Decal
Ship Name Decal

A ship name decal is a rectangle for displaying the name of the spacecraft.

Door

Door
Door

Doors are used to interconnect rooms and to connect the rooms inside a design with the outside.

Doors open and close in response to players and NPCs. Each door can provide geometry for its appearance when open, closed, and several states in between for animation. The open state often has no geometry, which is typical, though it could have geometry, such as a door swung open. The closed state is usually drawn to look like it would block your way; otherwise it is confusing to players when they cannot move through the closed doorway. The geometry of each door state has no effect on obstructions; it just looks nice.

Doors have two door switches. The default location for door switches is the center of the door geometry. Door switches can be moved anywhere else in the design. They are not visible. The architect must create some geometry to give a visual cue of its presence, if desired.

Doors can be locked, to restrict who is allowed to open them. Each door can provide geometry for its appearance when locked and unlocked. When no locked states are provided, the unlocked door states are used.

Doors can be stuck in the open or closed state. Each door can provide geometry for its appearance when stuck open and stuck closed. When no stuck states are provided, the normal door states are used.

The open state of a door is associated with one or more voids. Those voids are only accessible when the door is in the open state. That is what makes doors work to permit movement from one room void to another or from a room void to outside.

The open state of a door is associated with one or more walk paths or ladder paths. This allows NPCs to find a path through the door, and to know it needs to be opened first.

Add more states to the door by right-clicking on it in the parts window. Change the state of the door to Open and change it's appearance to the way it should look when opened. You can add geometry, such as a ladder or ramp that deploys when the door is open. You may delete the open door faces entirely so the door vanishes when it is opened. After the states of a door are finished, that door can be copied and pasted to replace the default door in other identical door openings.

Interior Door Structure

Interior Door Structure
Interior Door Structure

The Interior Door Structure diagram shows how an interior door should be constructed in the design.

The architect designs two rooms where a door is needed. Room voids are added to each room; they do not overlap, which prevents people from moving from one room to the other room.

A door hole is cut into each opposing room wall. The shape of the door opening is arbitrary. The walls to be connected are parallel in the diagram but that is not a requirement. The sides of the opening are lined with faces to make a seamless passage between the rooms. A door part is created to fill the hole, appearing to block the opening.

Door jigs exist to make this connection automatically. They cut the walls, line the passage way, and create a basic door.

A room void is created that intersects both room voids through the doorway, creating a connection between them that a person can move through. That room void is associated with the open state of the door. Then the room void is only there and passable when the door is open.

That is enough for human players to use the door. However, Hazeron is populated by dumb NPCs that need a little help.

Walk paths are added for NPCs. Walk paths should be added to connect each room. The walk path through the door is usually a single segment that starts and ends in the room voids on each side of the door. The ends should place an NPC close enough to the door switch to operate the door. The ends must be inside room voids that are not associated with the door, so they can be reached when the door is open or closed. The walk path through the door is also associated with the open state of the door.

The walk path through the door should be connected with the rest of the path network on each side of the door, if any.

Hull Door Structure

Hull Door Structure
Hull Door Structure

The Hull Door Structure diagram shows how an exterior door should be constructed in the design.

The architect designs a hull and places a room inside where an exterior door is wanted.

A room void is added to the room. There is no connection between the inside and the outside of the design.

A door opening is cut through to the outside and a door part is created to block the opening. Use a jig.

A room void is added that intersects Room Void A and ends somewhere inside the door. The person going through the door is "inside" the ship while inside this room void, or any room void.

A hull void is added that intersects the room void inside the door and extends out through the door.

The hull void and the door room void are associated with the open state of the door. The association of both a room void and a hull void to a door is what distinguishes the door as a hull door. Then the room void and the hull void are only there and passable when the door is open.

Walk paths are added for NPCs. Walk paths should be added to connect the room void to the outside. The walk path through the door is usually a single segment from the interior room void to outside the door. The ends should place an NPC close enough to the door switch to operate the door. One end must be inside the interior room void, so NPCs can move there when the door is closed. The other end of the walk path must be accessible from the outside when the door is closed or open. The walk path through the door is also associated with the open state of the door.

In the interior room void, the walk path through the door should be connected with the rest of the path network.

Due to the obstruction model, it may also be necessary to add another hull void just outside the door (not pictured). Do not associate it with the door. That hull void may be needed to allow people to move close enough to the door to operate the door switch.

Fence

Fence
Fence

Fence parts create fences and walls.

Fence parts can only be added to building designs. They are not permitted in spacecraft designs.

Fences and walls are drawn as a series of segments. Each fence segment creates a fence part. That fence part represents a single section, with a post at each end; redundant posts are removed where multiple fences join. When a fence part is drawn in a design, it is not subdivided into nominal section lengths like when a fence is drawn on terrain in the game environment. The architect decides the location of every post.

When the building design is placed on terrain, end points of fence sections elevate to the terrain as it rises and falls due to site grading.

Fence Styles

Fences offer a selection of fence and wall styles.

Fences and walls are obstructions to movement and gunfire, depending on the style.

  • Wood Posts - Posts block movement and gunfire.
  • Tee Posts - Posts block movement and gunfire.
  • Wire Fence on Wood Posts - Wire fences block movement of large things. Movement of creatures is not blocked if their max health is 100hp or less. Gunfire is not blocked.
  • Wire Fence on Tee Posts - Wire fences block movement of large things. Movement of creatures is not blocked if their max health is 100hp or less. Gunfire is not blocked.
  • Range Fence on Wood Posts - Range fencing blocks movement of most things. Movement of creatures is not blocked if their max health is 10hp or less. Gunfire is not blocked.
  • Range Fence on Tee Posts - Range fencing blocks movement of most things. Movement of creatures is not blocked if their max health is 10hp or less. Gunfire is not blocked.
  • Chain Link Fence - Chain link fences block movement. Gunfire is not blocked.
  • Chain Link Fence with Razor Wire - Chain link fences block movement. Gunfire is not blocked.
  • Split Rail Fence - Split rail fences block movement of large things. Movement of creatures is not blocked if their max health is 100hp or less. Gunfire is not blocked.
  • Stockade Fence - Stockade fences block movement and gunfire.
  • Sand Bag Wall - Sand bag walls block movement and gunfire.
  • Brick Wall - Walls block movement and gunfire.
  • Stone Wall - Walls block movement and gunfire.
  • Custom Wall or Fence - Custom walls and fences block movement and gunfire.

Custom fences can only be previewed while on line. When off line, those fences will appear as a row of stakes connected with string. That is how a fence under construction appears in the game environment. Custom fences and walls are not currently supported as a part of a building design. They can be drawn in the game environment, using custom fence and wall designs.

Game Table

Game Table
Game Table

Game tables provide a place for avatars to play games with each other.

Game tables create a standard table with four chairs in the final model. No further modeling of the game table is required.

The default size of the placement icon is the size of the game table model. Changing the size of the icon does not change the size of the table.

Game tables can host two games. Both games require at least two players to start.

  • HiLo - A number guessing game.
  • Texas Hold'em - A poker game.

Press the E key to sit at a chair of a game table.

Press the Tab key to start a game.

Hull

Hull
Hull

Hull parts describe the solid parts of the design, visually and structurally.

Hull parts are the primary contributor to the solid portion of the obstruction model.

Jig, Cutting

Cutting Jig
Cutting Jig

A cutting jig is used like a cookie cutter, to cut the faces of parts. It is created by drawing the shape of the cut. The shape is extruded into a jig. Round jigs can be created to make round cuts.

To use a cutting jig, position it so it penetrates one or two parts. Not all parts can be cut using a jig.

Select the jig and the parts. Use the Design, Jig Cut command to make the cut. If the cut produces broken results, use undo, then move the jig or modify it slightly, then try again. The jig is unchanged so it can be used repeatedly to make additional matching cuts.

Jigs are no longer needed after making a cut. They may remain in the design for future use.

Jigs are omitted from the finalized blueprint and they cannot be seen in the game environment. In order to share a design with the jigs intact, the blueprint must be finalized as an assembly. Then no part is omitted.

Jig, Decal

Decal Jig
Decal Jig

A decal jig is used like a cookie cutter, to cut a decal that conforms to the faces of parts. It is created by drawing the shape of the decal outline. The shape is extruded into a jig. Round jigs can be made by entering a radius.

To use the decal jig, position it so it penetrates one part. Select the jig and the part. Use the Jig Cut command to make the decal. If the cut produces broken results, use undo, then move the jig or modify it slightly, then try again. The jig is unchanged so it can be used repeatedly to make additional matching cuts.

The original part is unchanged. The jig produces a new decal part that conforms to the faces intersected by the jig.

Jigs are no longer needed after making a decal. They may remain in the design for future use. Jigs are not visible in the game.

Jigs are omitted from the finalized blueprint and they cannot be seen in the game environment. In order to share a design with the jigs intact, the blueprint must be finalized as an assembly. Then no part is omitted.

Jig, Door

Door Jig
Door Jig

A door jig makes a door between an interior room and the outside of the hull. A door jig also makes a door between two interior rooms.

A door jig is used like a cookie cutter, to cut doors in walls. It is created by drawing the shape of the door. The shape is extruded into a jig. Round jigs can be made by entering a radius.

To use the door jig, position it so it penetrates two parts. They can be hull or room parts. Select the jig and the two parts. Use the Jig Cut command to make the cut. If the cut produces broken results, use undo, then move the jig or modify it slightly, then try again. The jig is unchanged so it can be used repeatedly to make additional matching doors.

A door part is created with geometry in the Closed state and no geometry in the Open state. If no other states or geometry are added, the door will simply disappear when opened. It reappears when closed.

Jigs are no longer needed after doors are cut. They may remain in the design for future use. Jigs are not visible in the game.

Jigs are omitted from the finalized blueprint and they cannot be seen in the game environment. In order to share a design with the jigs intact, the blueprint must be finalized as an assembly. Then no part is omitted.

Jig, Launch Tube

Launch Tube Jig
Launch Tube Jig

A launch tube jig is used like a cookie cutter, to cut a passage between an interior room and the hull skin. It is created by drawing the shape of the launch tube. The shape is extruded into a jig. Round jigs can be made by entering a radius.

To use the launch tube jig, position it so it penetrates a room and a hull part. Select the jig, room and hull parts. Use Jig Cut to cut the launch tube. If the cut produces broken results, use undo, then move the jig or modify it slightly, then try again. The jig is unchanged so it can be used repeatedly to make additional matching launch tubes.

After the launch tube is cut out, a space vehicle launcher must be installed to complete the launch system.

Jigs are no longer needed after making a cut. They may remain in the design for future use. Jigs are not visible in the game.

Jigs are omitted from the finalized blueprint and they cannot be seen in the game environment. In order to share a design with the jigs intact, the blueprint must be finalized as an assembly. Then no part is omitted.

Jig, Window

Window Jig
Window Jig

A window jig makes a window between an interior room and the outside of the hull. A window jig also makes a window between two interior rooms.

A window jig is used like a cookie cutter, to cut windows in walls. It is created by drawing the shape of the window. The shape is extruded into a jig. Round jigs can be made by entering a radius.

To use the window jig, position it so it penetrates one or two parts. They can be hull or room parts. When only one part is penetrated, it must be a hull. Select the jig and the parts. Use the Jig Cut command to make the cut. If the cut produces broken results, use undo, then move the jig or modify it slightly, then try again. The jig is unchanged so it can be used repeatedly to make additional matching windows.

A pane of glass is created from the cut of each part. Glass is optional and it may be deleted, moved, or used in any way you like. When only a hull part is cut, the glass is translucent and only decorative. Windows glow when inside lighting is on, including decorative windows.

Jigs are no longer needed after windows are cut. They may remain in the design for future use. Jigs are not visible in the game.

Jigs are omitted from the finalized blueprint and they cannot be seen in the game environment. In order to share a design with the jigs intact, the blueprint must be finalized as an assembly. Then no part is omitted.

Landing Gear

Landing Gear
Landing Gear

Landing gear is the ship's legs and feet. Landing gear is the part of a spacecraft that holds it upright and undamaged when sitting on the ground.

Landing gear is optional. In Hazeron, ships do not roll over without landing gear; they are always oriented upright to gravity when sitting on the ground.

For most things, landing gear is treated just like hull parts, including obstructions. The big difference with landing gear is that it can be in different states that affect the overall shape of the spacecraft.

Landing gear is initially created with one Extended state.

Landing gear state is controlled at the helm station. To make the gear retractable, a Retracted state must be added. The retracted state can be empty so the gear is simply gone when retracted or it may present some geometry.

Intermediate states can be added, to animate the transition between extended and retracted states. These are optional. Sometimes just adding one in the middle of the transition is enough to make it come to life.

Landing gear can be stuck in the retracted or extended states. Stuck Extended and Stuck Retracted states may be added to present a different appearance. When stuck states are not present, normal states are used.

Spacecraft sit on the ground on their bottom-most extent. This can be visualized by using the Show Ground toggle. It shows a plane textured like dirt at the bottom extent of the spacecraft design. Landing gear can alter that extent. Extending and retracting the gear shows how the ship will sit on the ground in both states.

If trivial structures like antennae or ladders cause unwanted changes to the bottom extent of the ship, make them with simple meshes instead of hull or landing gear parts.

Light Bulb

Light Bulb
Light Bulb

Light is emitted from the light bulb to illuminate the surroundings. Street lights are turned on/off automatically, as natural light level changes. Spacecraft headlights are turned on/off using ship controls.

Light bulbs are not visible in the game environment. Add a light lens for visible geometry.

Spot Light Cones
Spot Light Cones

Light sources are a demanding resource when rendering the scene. Client scene settings control the number of light sources that are supported by their computer. Light sources produce light from the closest one to the observer to the farthest, up to the supported number of lights. The light sources nearest the observer will illuminate their surroundings. Lights farther away will not illuminate their surroundings.

A design may have only one light bulb. Adding another bulb will change the properties of the existing bulb rather than add another one.

The light bulb may be a spot light. A spot light's illumination is emitted from the light bulb location. The light is emitted in a specific direction. The cone of light of a spot light can be restricted by changing its properties.

The light may also be omnidirectional. Omnidirectional lights emit illumination in all directions equally.

Objects do not cast shadows. No matter the type of light, objects do not block that light from other objects. The light will not be blocked by your own hull or room pieces.

Light bulb can only be added to spacecraft designs and to street light building designs.

Light Lens

Light Lens
Light Lens

Light lenses provide geometry that glows brightly when the head light or street light is on.

The parts represent only the glowing lit lens portion of the light. The bezel or other hardware should not be included in the light or they will glow. Street lights are turned on/off automatically, as natural light level changes. Spacecraft headlights are turned on/off using ship controls.

Light lenses produce an even glow that appears as a glow spot centered on the lens. Light lenses do not blink or oscillate.

Making light lenses does not affect the actual emission of light by the design. Illumination is added by making a light bulb. Light illumination does not require that any light lens parts exist; they simply add detail.

Mesh

Mesh
Mesh

Meshes provide geometry that has no specific role in the design. Meshes are useful for adding decorations, furniture, transporter pads, parking spots, berths, surgery units, etc. Meshes can also provide a starting point for many different parts that can be created using the Make menu.

Models imported from 3DS and STL files become meshes in the designer.

Meshes are not obstructions.

Meshes do not add hit points, mass, or construction time or materials.

Nav Light Lens

Nav Light
Nav Light

This represents only the glowing lit lens portion of the lights. The bezel or other hardware should not be included in the light or they will glow.

The color of the nav light glow is configurable.

Navigation lights are turned on/off using ship controls. Nav lights on building are on at night.

Nav light lenses produce an even glow in the color that is configured for them. Nav light lenses do not blink or oscillate.

Terrestrial aircraft usually have a green nav light on the starboard wingtip and a red nav light on the port wingtip. Sometimes they have a red nav light on the belly.

Panel, Capacitor

Capacitor Service Panel
Capacitor Service Panel

Capacitor service panel provides access to the capacitor system of a spacecraft. Repairs to the system can be performed there. Parts can be removed from the system there. System modules can be upgraded there.

Service panels appear as a rectangle in the design, that is self illuminated like a display screen. Service panels should be placed where they can be accessed by the crew.

Service panels are not control stations. No operator position is defined. Players use them by clicking on them.

Panel, FTL Drive

FTL Drive Service Panel
FTL Drive Service Panel

FTL drive service panel provides access to an FTL drive subsystem of a spacecraft. Repairs to the subsystem can be performed there. Parts can be removed from the subsystem there. Subsystem modules can be upgraded there.

FTL drive service panel is associated with an engineer station. This determines which FTL drive subsystem the service panel accesses.

It is ok to associate more than one service panel with the same subsystem.

Service panels appear as a rectangle in the design, that is self illuminated like a display screen. Service panels should be placed where they can be accessed by the crew.

Service panels are not control stations. No operator position is defined. Players use them by clicking on them.

Panel, Life Support

Life Support Service Panel
Life Support Service Panel

Panel, Maneuver Drive

Maneuver Drive Service Panel
Maneuver Drive Service Panel

Panel, Power Plant

Power Plant Service Panel
Power Plant Service Panel

Panel, Sensor

Sensor Service Panel
Sensor Service Panel

Panel, Shield

Shield Service Panel
Shield Service Panel

Panel, Weapon

Weapon Service Panel
Weapon Service Panel

Parking Spot, Ground Vehicle

Ground Vehicle Parking Spot
Ground Vehicle Parking Spot

A ground vehicle parking spot indicates a place to park a ground vehicle.

The default icon depicts a space that is 6m x 12m.

The parking spot requires direct access to the outside through a door or opening or the design must be equipped with a vehicle transporter system.

On a ship equipped with a vehicle transporter, parking spots act as transporter pads for vehicles. Enter the vehicle and use the Crew channel on the Comm to request transport.

At vehicle factories, new vehicles are placed on ground vehicle parking spots.

Other buildings with ground vehicle parking spots will fill their parking spots by moving a vehicle from a vehicle factory, from time to time.

Parking Spot, Spacecraft

Spacecraft Parking Spot
Spacecraft Parking Spot

Parking Spot, Space Rocket

Space Rocket Parking Spot
Space Rocket Parking Spot

Parking Spot, Space Vehicle

Space Vehicle Parking Spot
Space Vehicle Parking Spot

Parking Spot, Water Vehicle

Water Vehicle Parking Spot
Water Vehicle Parking Spot

Path, Ladder

Ladder Path
Ladder Path

Path, Walk

Walk Path
Walk Path

Pod Bay

Drop Pod
Drop Pod

Post, Citizen

Citizen Post
Citizen Post

Post, Livestock

Livestock Post
Livestock Post

Post, Troop

Troop Post
Troop Post

Room

Room
Room

Rotating Beacon Lens

Rotating Beacon Lens
Rotating Beacon Lens

Shrub

Shrub
Shrub

Site

Site
Site

Sketch

Sketch
Sketch

A sketch is a rectangle for displaying a picture.

The sketch is not included in the design when it appears in the game. It is used only during the design process.

The design refers to the picture by it's file path name. The picture itself is not embedded in the design. If the picture file is moved or renamed, it will no longer be visible.

The designer must be restarted to see changes to the picture in the file, if changes are made to it after the picture was loaded by the designer.

Space Vehicle Landing System

Space Vehicle Landing System
Space Vehicle Landing System

Space Vehicle Launcher

Space Vehicle Launcher
Space Vehicle Launcher

Station, Command

Command Station
Command Station

Command station provides a place for the capt or officer to command the ship. NPC officers are not required to sit there but sometimes they will choose to do so.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding command console part that can be used instead of this station.

Station, Designer

Designer Station
Designer Station

Designer console provides a place for an avatar to enter a designer instance while aboard a spacecraft.

Each designer station accesses a separate designer instance aboard the same ship.

Designer stations are only for spacecraft designs; they cannot be placed in buildings. Designers in buildings are entered using the Building window.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

The occupant of the designer instance never actually appears in the station operator's position. They disappear from the game universe when they enter the designer and they exit the designer back to where they were when they entered the designer.

Station, Engineer

Engineer Station
Engineer Station

Engineer console provides a place for an avatar or NPC crew to control the power plant, maneuver drive, and FTL drive of the ship.

Engineer stations are only for spacecraft designs; they cannot be placed in buildings.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding engineer console part that can be used instead of this station.

Station, Fire Control

Fire Control Station
Fire Control Station

Fire control console provides a place for an avatar or NPC crew to control the equipment bays of the ship. Equipment bays typically hold weapon systems, though they can also hold harvesters and tractor beams.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding fire control console part that can be used instead of this station.

Station, Helm

Helm Station
Helm Station

Helm console provides a place for an avatar or NPC crew to pilot the ship.

Helm stations are only for spacecraft designs; they cannot be placed in buildings.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding helm console part that can be used instead of this station.

Station, Medic

Medic Station
Medic Station

Medic console provides a place for an avatar or NPC crew to operate a surgery unit on the ship.

The medic station stores a patient location and orientation for the patient. The patient location is only a location. Additional geometry may be added to create the appearance of a bed or chamber.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding medic console part that can be used instead of this station.

Station, Navigator

Navigator Station
Navigator Station

Navigator console provides a place for an avatar or NPC crew to plan and establish a route for the ship.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding navigator console part that can be used instead of this station.

Station, Power Relay

Power Relay Station
Power Relay Station

Power relay console provides a place for an avatar or NPC crew to make dubious adjustments to the power system of the spacecraft.

Power relay stations are only for spacecraft designs; they cannot be placed in buildings.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding power relay console part that can be used instead of this station.

Station, Sensor

Sensor Station
Sensor Station

Sensor console provides a place for an avatar or NPC crew to control the sensors of a spacecraft or building.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding sensor console part that can be used instead of this station.

Station, Shield

Shield Station
Shield Station

Shield console provides a place for an avatar or NPC crew to control the shields of a spacecraft or building.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding shield console part that can be used instead of this station.

Station, Transporter

Transporter Station
Transporter Station

Transporter console provides a place for an avatar or NPC crew to control a transporter system of a spacecraft or building.

Each transporter station creates a new transporter system. Each station stores the location of its teleportation pads.

The architect must create the geometry for teleportation pads, if desired. Using surface effects, teleporter pads can be made to look alive when the transporter is in use.

Stations store the location of their screen and occupant. They do not provide any additional geometry in the final model, other than the screen itself. The architect draws the geometry surrounding the screen and possibly a chair.

To create a station that provides its own generic geometry, there is a corresponding transporter console part that can be used instead of this station.

Status, Alert

Alert Status Panel
Alert Status Panel

Status, Life Support

Life Support Status Panel
Life Support Status Panel

Status, Mission

Mission Status Panel
Mission Status Panel

Status, World Map

World Map Status Panel
World Map Status Panel

Strobe Lens

Strobe Lens
Strobe Lens

Tree

Tree
Tree

Turbo Lift

Turbo Lift
Turbo Lift

Turbo lifts work like elevators. They move from one stop to another, at the request of the passengers. Unlike a real elevator, a turbo lift teleports instantly to each stop.

This enables separate interior sections of a design to be connected in a way that feels contiguous to players. Turbo lifts also enable separate sections to be interconnected when the geometry to create the passage ways between them might be difficult or impossible to make.

Turret

Turret
Turret

Void, Environment

Environment Void
Environment Void

Void, Room

Room Void
Room Void

Room voids exclude or erase portions of the obstruction model. Objects inside a room void are never considered to be blocked by the hull obstruction model, though they may be blocked by barriers.

Room voids are not visible in the game environment. Room voids allow the visible room geometry to be complex while keeping the room void simple. Simplicity is critical for room voids, to minimize the CPU's work when using them in calculations.

Room voids provide a habitable environment. Objects inside a room void are considered to be inside the design.

Room void lights can be turned on and off.

Room voids offer a choice of internal gravity options.

Room voids enable access to the cargo hold.

Options for room void gravity and hold access are configured when the void is created. Room void properties can be changed afterwards using Part, Properties, Room Void Gravity and Hold Access.

Room voids are usually grouped with the visible room geometry of the room. That way, the room geometry is lit according to the lights in the room void. The name of the group is the name of the room that will be seen in the game.

Room voids may be associated with a state of a part. Doors associate a room void with their open state, to create a passage that is only accessible when the door is opened.

Void, Hull

Hull Void
Hull Void

Hull voids exclude or erase portions of the obstruction model. Objects inside a hull void are never considered to be blocked by the hull obstruction model, though they may be blocked by barriers.

Depressions and cavities formed in a single hull part may result in unwanted obstructions. For example, a thruster nozzle made from a single conical hull part would be obstructed inside the cone; a hull void could be used to permit movement into the cone.

Gravity inside hull voids matches the environment around the spacecraft or building.

Hull voids are also integral to describing a hull door. Refer to the section on doors.

  • Faces of a void must form an airtight shell.
  • Faces of a void must be flat, not bent. Use triangles to make bumpy voids. Do not bend quads or poly faces.
  • Use voids sparingly and strictly limit the number of faces. Overall size of a void is not a factor; number of faces is the critical resource that must be minimized.
  • Multiple voids with few faces is strongly preferred over elaborate voids with many faces. It is far better to intersect two long boxes than to make a single cross shaped void.
  • Voids may overlap other voids, allowing movement from one void to the next. A small amount of overlap is more reliable than trying to abut them perfectly and it's easier to draw.
  • Hull voids should extend outside the obstruction model so there is no ambiguity when entering or exiting. Excess hull void that extends beyond the obstruction model has no negative consequence.

Window

Window
Window

Window parts exist primarily to create windows between the inside and outside of a building or spacecraft. However, windows can also be used to join rooms and they can be used for decoration.

A transparency value is assigned to windows. Transparency may be set to invisible. Invisible windows are not useful for any purpose.

Windows glow in response to internal lighting conditions. Transparent windows should be grouped with the room that contains them, to be lit appropriately.

Transparency may be set to translucent. Translucent windows are decorative, glowing in response to simulated internal lighting conditions. This makes them useful to create a facade, suggesting interior rooms where none exist, by creating the appearance of many windows.

Translucent decorative windows may be grouped to cause them to be lit the same, as if they are all part of the same room.

Avoid situations where the player may see through several windows at the same time. This will often produce undesirable results.