Design Parts: Difference between revisions

From Hazeron Wiki
Jump to navigation Jump to search
Line 96: Line 96:
=Console, Command=
=Console, Command=
[[file:Dp_CmdConsole.png|64px|right|Command Console]]
[[file:Dp_CmdConsole.png|64px|right|Command Console]]
Command console provides a place for the capt or officer to command the ship. NPC officers are not required to sit there but sometimes they will choose to do so.
The default command console model is a chair with no screen. A screen appears when the person at the station brings up some control station for interaction.
Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the command station is required.
User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.
The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.
To create custom geometry for a station, there is a corresponding [[Design_Parts#Station.2C_Command|station part]] that can be used instead of this stock console.


=Console, Engineer=
=Console, Engineer=

Revision as of 20:44, 16 July 2020

Designs are made up of parts. Here is a comprehensive list of all of the parts that can comprise a design.

Some parts are only available depending on if it is a building design, spacecraft design, or other.

Barrier

Barrier
Barrier

Barriers created obstructions to movement and gunfire inside voids.

Barriers are not visible when the design is seen in the game environment.

Barriers create floors for things on top of them. Use barriers to create the floors of ramps and stairs. When creating stairs, it is much more efficient to make a ramp-floor under the steps than to create complex or many barriers to simulate every step.

Barriers can be associated with a state of a door or landing gear. This determines which barriers are obstructions when the door or landing gear is operated. It is ok to associate more than one barrier with a state of a door or landing gear.

Berth, Capt

Capt Berth
Capt Berth

Capt berth is the place where the captain sleeps. Only a human player can occupy the capt berth.

A design can have only one capt berth. Attempting to add additional capt berths causes the existing capt berth to move to the new location, instead of adding a new one.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Crew

Crew Berth
Crew Berth

Crew berth is the place where a member of the crew sleeps. Human players and NPCs can occupy crew berths.

When crew board a newly assigned ship, they do so by recalling to their berth. The architect should insure they can find a path from their berth to every control station on the ship. The control station they are assigned is unpredictable because it is affected by the NPC's skill level.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Officer

Officer Berth
Officer Berth

Officer berth is the place where an officer of the ship sleeps. Human players and NPCs can occupy officer berths.

When officers board a newly assigned ship, they do so by recalling to their berth. They sometimes like to sit at a command station but it is never required. It is considerate to insure the path network helps them find their way to any command stations aboard the ship.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Passenger

Passenger Berth
Passenger Berth

Passenger berth is the place where a passenger of the ship sleeps. Human players and NPCs can occupy passenger berths.

When passengers board a newly assigned ship, they do so by recalling to their berth. They like to explore the ship so you will find them wherever they can gain access. Passengers cannot open locked doors but they will walk through any door that is open.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Berth, Troop

Troop Berth
Troop Berth

Troop berth is the place where a troop assigned to the ship sleeps. Human players and NPCs can occupy troop berths.

When troops board a newly assigned ship, they do so by recalling to their berth. Troops operate the gun turrets of a ship but not its main weapon systems; they also position themselves at troop posts. The architect should insure the troops can find a path from their berth to every turret station and troop post on the ship.

The cursor depicts a space that is 1m x 2m. This does not establish any minima or maxima. The occupant appears at the center location of the icon.

The berth is not visible when the design appears in the game environment. The architect must create any geometry depicting the berth that is desired. Berths provide life support to the occupant so it is appropriate to depict a cover or capsule of some kind.

Berths are only placed in spacecraft designs. Berths are not used in building designs.

Build Zone

Build Zone
Build Zone

A build zone mesh describes the areas of a platform structure where buildings may be constructed. They also create floors for creatures and things on top of the platform. More than one build zone mesh may be used to describe building areas of a platform.

Build zones create floors for creatures and things on top of the platform. The space for 3m above a build zone acts like a hull void to negate hull obstructions.

Build zone meshes should form level flat areas for buildings. Buildings built on build zone meshes do not modify the underlying platform model, like they do when placed on natural terrain.

Site meshes of buildings built on a platform must fit within the bounds of the platform's build zone meshes. Buildings are oriented up with respect to the platform, regardless of any slope of the build zone mesh.

Camera

Camera
Camera

Remote cameras permit an avatar sitting at a command station to see from the camera's location.

Command station controls provide a camera on/off switch, then back/next sequencing to select cameras. The part number of a camera determines its order in the back/next sequence.

Remote camera icons provide location information only. They are not visible in the final model. Size and rotation of the icon do not affect the camera. Camera location is at the center of the icon.

To avoid tediously switching between many cameras, use an efficient number of remote cameras.

Console, Command

Command Console
Command Console

Command console provides a place for the capt or officer to command the ship. NPC officers are not required to sit there but sometimes they will choose to do so.

The default command console model is a chair with no screen. A screen appears when the person at the station brings up some control station for interaction.

Consoles create a standard swivel chair and station screen in the final model that looks somewhat like an elementary school student's desk. No further modeling of the command station is required.

User controls enable the screen to be moved and rotated for optimum viewing. Due to differences in avatar DNA, the last used position is stored/restored per avatar.

The default size of the placement icon is the size of the console model, with the screen in its default position. The placement point of the console is the point at which the chair spins around when the occupant turns.

To create custom geometry for a station, there is a corresponding station part that can be used instead of this stock console.

Console, Engineer

Engineer Console
Engineer Console

Console, Fire Control

Fire Control Console
Fire Control Console

Console, Helm

Helm Console
Helm Console

Console, Medic

Medic Console
Medic Console

Console, Navigator

Navigator Console
Navigator Console

Console, Power Relay

Power Relay Console
Power Relay Console

Console, Sensor

Sensor Console
Sensor Console

Console, Shield

Shield Console
Shield Console

Console, Transporter

Transporter Console
Transporter Console

Contrail Emitter

Contrail Emitter
Contrail Emitter

Decal

Decal
Decal

Decal parts are intended to simulate the decals applied to plastic models. They typically arrive on a sheet.

Decal Sheet
Decal Sheet

A decal's faces are textured like the faces of any other part. When rendered, faces of decals are blended onto the faces of underlying geometry. OpenGL is configured to enable decals to exist in the same plane as other surfaces, without getting culled or causing unwanted surface collisions.

Decals should generally be placed where they conform to an existing surface, though this is not strictly necessary if a desirable visual effect is achieved by using them otherwise.

Decal, Berth Name

Berth Occupant Name Decal
Berth Occupant Name Decal

A berth name decal is a rectangle for displaying the name of the person assigned to a berth. When the associated berth is not assigned, the berth name decal shows Unassigned.

The name decal is created by entering two corner points of a rectangle. The name decal is oriented to the grid, with +X going to the right and +Y going up on the name decal. After creating a berth name decal, it should be associated with a berth, to show the assignee's name.

Steps:

  • A corner point of the name decal is entered.
  • The opposite corner point of the name decal is entered.

Key Commands:

  • C restarts the action at the beginning.

Decal, Capt Name

Capt Name Decal
Capt Name Decal

A name decal is a rectangle for displaying the name of the captain of the spacecraft.

The name decal is created by entering two corner points of a rectangle. The name decal is oriented to the grid, with +X going to the right and +Y going up on the name decal.

Steps:

  • A corner point of the name decal is entered.
  • The opposite corner point of the name decal is entered.

Key Commands:

  • C restarts the action at the beginning.

Decal, Empire Flag

Empire Flag Decal
Empire Flag Decal

A flag decal is a rectangle for displaying the flag of the empire.

The flag is created by entering two corner points of a rectangle. The flag is oriented to the grid, with +X going to the right and +Y going up on the flag.

The flag rectangle should be square or nearly square in aspect ratio. It should have faces behind it. The flag that gets displayed in the area may not be square in shape. The flag's aspect ratio will be preserved, exposing faces behind the flag, or visible through holes in the flag.

Steps:

  • A corner point of the flag is entered.
  • The opposite corner point of the flag is entered.

Key Commands:

  • C restarts the action at the beginning.

Decal, Empire Name

Empire Name Decal
Empire Name Decal

A name decal is a rectangle for displaying the name of the empire.

The name decal is created by entering two corner points of a rectangle. The name decal is oriented to the grid, with +X going to the right and +Y going up on the name decal.

Steps:

  • A corner point of the name decal is entered.
  • The opposite corner point of the name decal is entered.

Key Commands:

  • C restarts the action at the beginning.

Decal, Ship Name

Ship Name Decal
Ship Name Decal

A name decal is a rectangle for displaying the name of the spacecraft.

The name decal is created by entering two corner points of a rectangle. The name decal is oriented to the grid, with +X going to the right and +Y going up on the name decal.

Steps:

  • A corner point of the name decal is entered.
  • The opposite corner point of the name decal is entered.

Key Commands:

  • C restarts the action at the beginning.

Door

Door
Door

Doors are used to interconnect rooms and to connect the rooms inside a design with the outside.

Doors open and close in response to players and NPCs. Each door can provide geometry for its appearance when open, closed, and several states in between for animation. The open state often has no geometry, which is typical, though it could have geometry, such as a door swung open. The closed state is usually drawn to look like it would block your way; otherwise it is confusing to players when they cannot move through the closed doorway. The geometry of each door state has no effect on obstructions; it just looks nice.

Doors have two door switches. The default location for door switches is the center of the door geometry. Door switches can be moved anywhere else in the design. They are not visible. The architect must create some geometry to give a visual cue of its presence, if desired.

Doors can be locked, to restrict who is allowed to open them. Each door can provide geometry for its appearance when locked and unlocked. When no locked states are provided, the unlocked door states are used.

Doors can be stuck in the open or closed state. Each door can provide geometry for its appearance when stuck open and stuck closed. When no stuck states are provided, the normal door states are used.

The open state of a door is associated with one or more voids. Those voids are only accessible when the door is in the open state. That is what makes doors work to permit movement from one room void to another or from a room void to outside.

The open state of a door is associated with one or more walk paths or ladder paths. This allows NPCs to find a path through the door, and to know it needs to be opened first.

Interior Door Structure

Interior Door Structure
Interior Door Structure

The Interior Door Structure diagram shows how an interior door should be constructed in the design.

The architect designs two rooms where a door is needed. Room voids are added to each room; they do not overlap, which prevents people from moving from one room to the other room.

A door hole is cut into each opposing room wall. The shape of the door opening is arbitrary. The walls to be connected are parallel in the diagram but that is not a requirement. The sides of the opening are lined with faces to make a seamless passage between the rooms. A door part is created to fill the hole, appearing to block the opening.

Door jigs exist to make this connection automatically. They cut the walls, line the passage way, and create a basic door.

A room void is created that intersects both room voids through the doorway, creating a connection between them that a person can move through. That room void is associated with the open state of the door. Then the room void is only there and passable when the door is open.

That is enough for human players to use the door. However, Hazeron is populated by dumb NPCs that need a little help.

Walk paths are added for NPCs. Walk paths should be added to connect each room. The walk path through the door is usually a single segment that starts and ends in the room voids on each side of the door. The ends should place an NPC close enough to the door switch to operate the door. The ends must be inside room voids that are not associated with the door, so they can be reached when the door is open or closed. The walk path through the door is also associated with the open state of the door.

The walk path through the door should be connected with the rest of the path network on each side of the door, if any.

Hull Door Structure

Hull Door Structure
Hull Door Structure

The Hull Door Structure diagram shows how an exterior door should be constructed in the design.

The architect designs a hull and places a room inside where an exterior door is wanted.

A room void is added to the room. There is no connection between the inside and the outside of the design.

A door opening is cut through to the outside and a door part is created to block the opening. Use a jig.

A room void is added that intersects Room Void A and ends somewhere inside the door. The person going through the door is "inside" the ship while inside this room void, or any room void.

A hull void is added that intersects the room void inside the door and extends out through the door.

The hull void and the door room void are associated with the open state of the door. The association of both a room void and a hull void to a door is what distinguishes the door as a hull door. Then the room void and the hull void are only there and passable when the door is open.

Walk paths are added for NPCs. Walk paths should be added to connect the room void to the outside. The walk path through the door is usually a single segment from the interior room void to outside the door. The ends should place an NPC close enough to the door switch to operate the door. One end must be inside the interior room void, so NPCs can move there when the door is closed. The other end of the walk path must be accessible from the outside when the door is closed or open. The walk path through the door is also associated with the open state of the door.

In the interior room void, the walk path through the door should be connected with the rest of the path network.

Due to the obstruction model, it may also be necessary to add another hull void just outside the door (not pictured). Do not associate it with the door. That hull void may be needed to allow people to move close enough to the door to operate the door switch.

Fence

Fence
Fence


Game Table

Game Table
Game Table

Hull

Hull
Hull

Jig, Cutting

Cutting Jig
Cutting Jig

Jig, Decal

Decal Jig
Decal Jig

Jig, Door

Door Jig
Door Jig

A door jig can be used to make a door between an interior room and the outside of the hull. A door jig can also be used to make a door between two interior rooms.

Jig, Launch Tube

Launch Tube Jig
Launch Tube Jig

Jig, Window

Window Jig
Window Jig

A window jig can be used to make a window between an interior room and the outside of the hull. A window jig can also be used to make a window between two interior rooms.

Landing Gear

Landing Gear
Landing Gear

Light Bulb

Light Bulb
Light Bulb


Light Lens

Light Lens
Light Lens


Mesh

Mesh
Mesh

Nav Light Lens

Nav Light
Nav Light

Panel, Capacitor

Capacitor Service Panel
Capacitor Service Panel

Panel, FTL Drive

FTL Drive Service Panel
FTL Drive Service Panel

Panel, Life Support

Life Support Service Panel
Life Support Service Panel

Panel, Maneuver Drive

Maneuver Drive Service Panel
Maneuver Drive Service Panel

Panel, Power Plant

Power Plant Service Panel
Power Plant Service Panel

Panel, Sensor

Sensor Service Panel
Sensor Service Panel

Panel, Shield

Shield Service Panel
Shield Service Panel

Panel, Weapon

Weapon Service Panel
Weapon Service Panel

Parking Spot, Ground Vehicle

Ground Vehicle Parking Spot
Ground Vehicle Parking Spot

Parking Spot, Spacecraft

Spacecraft Parking Spot
Spacecraft Parking Spot

Parking Spot, Space Rocket

Space Rocket Parking Spot
Space Rocket Parking Spot

Parking Spot, Space Vehicle

Space Vehicle Parking Spot
Space Vehicle Parking Spot

Parking Spot, Water Vehicle

Water Vehicle Parking Spot
Water Vehicle Parking Spot

Path, Ladder

Ladder Path
Ladder Path

Path, Walk

Walk Path
Walk Path

Pod Bay

Drop Pod
Drop Pod

Post, Citizen

Citizen Post
Citizen Post

Post, Livestock

Livestock Post
Livestock Post

Post, Troop

Troop Post
Troop Post

Room

Room
Room

Rotating Beacon Lens

Rotating Beacon Lens
Rotating Beacon Lens

Shrub

Shrub
Shrub

Site

Site
Site

Sketch

Sketch
Sketch

Space Vehicle Landing System

Space Vehicle Landing System
Space Vehicle Landing System

Space Vehicle Launcher

Space Vehicle Launcher
Space Vehicle Launcher

Station, Command

Command Station
Command Station

Station, Designer

Designer Station
Designer Station

Station, Engineer

Engineer Station
Engineer Station

Station, Fire Control

Fire Control Station
Fire Control Station

Station, Helm

Helm Station
Helm Station

Station, Medic

Medic Station
Medic Station

Station, Navigator

Navigator Station
Navigator Station

Station, Power Relay

Power Relay Station
Power Relay Station

Station, Sensor

Sensor Station
Sensor Station

Station, Shield

Shield Station
Shield Station

Station, Transporter

Transporter Station
Transporter Station

Status, Alert

Alert Status Panel
Alert Status Panel

Status, Life Support

Life Support Status Panel
Life Support Status Panel

Status, Mission

Mission Status Panel
Mission Status Panel

Status, World Map

World Map Status Panel
World Map Status Panel

Strobe Lens

Strobe Lens
Strobe Lens

Tree

Tree
Tree

Turbo Lift

Turbo Lift
Turbo Lift

Turbo lifts work like elevators. They move from one stop to another, at the request of the passengers. Unlike a real elevator, a turbo lift teleports instantly to each stop.

This enables separate interior sections of a design to be connected in a way that feels contiguous to players. Turbo lifts also enable separate sections to be interconnected when the geometry to create the passage ways between them might be difficult or impossible to make.

Turret

Turret
Turret

Void, Environment

Environment Void
Environment Void

Void, Room

Room Void
Room Void

Room voids exclude or erase portions of the obstruction model. Objects inside a room void are never considered to be blocked by the hull obstruction model, though they may be blocked by barriers.

Room voids are not visible in the game environment. Room voids allow the visible room geometry to be complex while keeping the room void simple. Simplicity is critical for room voids, to minimize the CPU's work when using them in calculations.

Room voids provide a habitable environment. Objects inside a room void are considered to be inside the design.

Room void lights can be turned on and off.

Room voids offer a choice of internal gravity options.

Room voids enable access to the cargo hold.

Options for room void gravity and hold access are configured when the void is created. Room void properties can be changed afterwards using Part, Properties, Room Void Gravity and Hold Access.

Room voids are usually grouped with the visible room geometry of the room. That way, the room geometry is lit according to the lights in the room void. The name of the group is the name of the room that will be seen in the game.

Room voids may be associated with a state of a part. Doors associate a room void with their open state, to create a passage that is only accessible when the door is opened.

Void, Hull

Hull Void
Hull Void

Hull voids exclude or erase portions of the obstruction model. Objects inside a hull void are never considered to be blocked by the hull obstruction model, though they may be blocked by barriers.

Depressions and cavities formed in a single hull part may result in unwanted obstructions. For example, a thruster nozzle made from a single conical hull part would be obstructed inside the cone; a hull void could be used to permit movement into the cone.

Gravity inside hull voids matches the environment around the spacecraft or building.

Hull voids are also integral to describing a hull door. Refer to the section on doors.

  • Faces of a void must form an airtight shell.
  • Faces of a void must be flat, not bent. Use triangles to make bumpy voids. Do not bend quads or poly faces.
  • Use voids sparingly and strictly limit the number of faces. Overall size of a void is not a factor; number of faces is the critical resource that must be minimized.
  • Multiple voids with few faces is strongly preferred over elaborate voids with many faces. It is far better to intersect two long boxes than to make a single cross shaped void.
  • Voids may overlap other voids, allowing movement from one void to the next. A small amount of overlap is more reliable than trying to abut them perfectly and it's easier to draw.
  • Hull voids should extend outside the obstruction model so there is no ambiguity when entering or exiting. Excess hull void that extends beyond the obstruction model has no negative consequence.

Window

Window
Window

Window parts exist primarily to create windows between the inside and outside of a building or spacecraft. However, windows can also be used to join rooms and they can be used for decoration.

A transparency value is assigned to windows. Transparency may be set to invisible. Invisible windows are not useful for any purpose.

Windows glow in response to internal lighting conditions. Transparent windows should be grouped with the room that contains them, to be lit appropriately.

Transparency may be set to translucent. Translucent windows are decorative, glowing in response to simulated internal lighting conditions. This makes them useful to create a facade, suggesting interior rooms where none exist, by creating the appearance of many windows.

Translucent decorative windows may be grouped to cause them to be lit the same, as if they are all part of the same room.

Avoid situations where the player may see through several windows at the same time. This will often produce undesirable results.